Dakota Visual Editor

Introduction

The Dakota Visual Editor is a powerful alternative to editing Dakota input files in a text editor. Gone are the days of manually tinkering with long number arrays, or hoping that variables and responses are active and indexed correctly.

If the Dakota Visual Editor is not configured as your default editor of Dakota input files, right-click a Dakota input file and choose “Open With > Dakota Visual Editor”. Otherwise, simply double-click the file.

Dakota Visual Editor

The Top Level

When first opened, the Dakota Visual Editor shows you the top level of a Dakota input file:

The top level

The hiearchical relationship of Dakota blocks is made explicit through indentation.

Top Level Context Menu

Right-clicking anywhere in the top-level view of a Dakota input file will give you the following pop-up context menu:

The top level
  • New: This sub-menu allows you to generate new Dakota input blocks, with options that are appropriate for the context of the existing block you clicked on. If you didn’t click on any Dakota block, you can still use this sub-menu to generate a Dakota environment block.

  • Rename: Rename the selected block’s ID field. This option is enabled for every type of block except for environment blocks, which have no IDs.

  • Reparent: Changes the parent relationship of the selected block. This is only appropriate if you have selected a block that has multiple possible parents (for example, selecting a “variables” block in a study with multiple “model” blocks).

  • Delete: Deletes the selected block.

Diving

Clicking on any Dakota block will take you to the editor for that block.

After diving into a specific Dakota block, the action bar along the top of the editor will update:

Button enablement
  • The left and right arrow buttons will allow you to traverse to the previous or next Dakota block in the input file, respectively.

  • The up arrow will allow you to return to the top of the Dakota input file.

  • The “(x)=” will allow you to modify pre-processor elements. If there is no pre-processor markup in your Dakota input file, this button will be dithered.

  • The purple beaker icon will allow to apply any known recipes to this block of the Dakota input file.

  • The green play button in the action bar will allow you to run the Dakota study right away, using an auto-generated run configuration with default settings.

Finally, note that there are “?” buttons throughout the editors for specific Dakota blocks (typically to the far-right of an individual editor control). The “?” button will take you to the appropriate keyword reference page in this manual.

Environment Blocks

Here is an example of a Dakota environment block in the Dakota Visual Editor.

The environment block

Method Blocks

Dakota has a multitude of method types, so we can’t cover all of them here. But we will take a look at one method editor that clearly demonstrates the benefits of using the Dakota Visual Editor: centered parameter studies.

Classically, a method block specifying centered_parameter_study would be written as follows in a Dakota input file:

The old way of doing things in a method block

The step_vector keyword is followed by a series of values, where each value relates to the variable that is in that same index in the variables block. Likewise for the steps_per_variable keyword.

For seven variables (as shown here), it is somewhat trivial (though not completely error-proof) to glance up and down between the method block and the variables block to determine which number goes with which variable. But as the number of variables increases, this manual verification process becomes more and more error-prone.

Worse still, if there is a specification of active variables for this Dakota study (that is, some variables are inactive), the index in the method block corresponds to the index from the list of active variables, NOT the full list of all variables from the variables block. In short, visually determining which method keyword value corresponds to what variable becomes much harder for active variable sets.

All of this is handled for us if we use the centered parameter study editor provided by the Dakota Visual Editor:

A centered parameter study block

There is now no longer a need to keep track of values by index. The step vector values and steps-per-variable values are visually associated with the proper variable, simply by being on the same row of the table. Also, each variable’s initial value is provided as well, to give additional context that can inform analysts what to choose for the step vector and steps-per-variable columns.

Choosing a Method

The Dakota Visual Editor now fully supports all Dakota methods. Because there are ~75 Dakota methods to choose from, it can be somewhat overwhelming to select the right one. Not to worry! The Dakota Visual Editor’s method block section contains a Google-esque search bar that allows you to partially type in method names to find the method you’re looking for. It is located directly below the “Method ID” field:

Search for methods by name

Model Blocks

Here is an example of a model block in the Dakota Visual Editor.

The model block

Variable Blocks

The editor for a variables block is slightly more involved and warrants some additional explanation.

The variables block
  • Variables ID This field controls the ID of your variables block.

  • Table Button Bar There’s a horizontal row across the top of the variable table that allows you to manipulate table data.

    • Add New Variable Adds a new variable to your variable block.

    • Edit Variable Edits the properties of the currently selected variable.

    • Remove Variable Removes the currently selected variable from the block.

    • Variable Ordering within Category Dakota variables are ordered first by variable category (sometimes referred to as “spec order”), and then by user-customized ordering within that category. This button allows you to configure the latter.

    • Auto-Visualize Variable For variable types that have an uncertainty/probability functions associated with them, this button allows you to visualize the curve (according to the properties set for this variable) in the Chartreuse Sandbox View.

    • Open Dakota Manual for Variable Category For the currently selected variable’s category, open the appropriate page in this manual.

    • Active variables dropdown Allows you to manually specify the active variable set of this Dakota variables block. Refer to the section on active variables for more information.

    • Variable Domain Located below the table, this dropdown allows you to manually specify a mixed or mixed domain for this variables block.

Within the table, the columns are as follows (from left to right):

  • (Active) If the variable is active according to the overall specification of this Dakota input file, a lit-up lightbulb icon will be displayed; otherwise, the lightbulb icon will appear dimmed. It is not possible to directly change the active/inactive state of a variable. Refer to the section on active variables for more information.

  • # The Dakota spec order for this variable. Dakota variables are ordered first by variable category and then by user-customized ordering within that category.

  • Variable The name (or “descriptor”) of the variable.

  • Category The category that this variable belongs to. Changing the category will automatically cause a reordering of Dakota variables based on the new category position of this variable.

Variable Properties Dialog

Once a variable has been assigned to a category (such as continuous_design), you can access that variable category’s properties. Click on the variable in the table, then click on the Edit Variable button (the second button from the left).

Variable property editor dialog

A new dialog will pop up that allows you to edit each possible property for that variable category. Help buttons are provided for each property so that you can read up on what each one does.

View Variable Table by Category

Along the top action bar of the Dakota Visual Editor, you may also notice a “View category” dropdown. This allows you to dive into viewing the properties of a single variable category:

Editing a specific variable category

Note that we are still in the same variables block, but the view has changed. In this screenshot, we’re only viewing continuous design variables. The other continuous state variables in this example have been hidden from view. In addition, the properties of those continuous design variables have been exposed as table columns. From this view, if you want to edit the properties of an individual variable, you no longer have to push the “Edit” button along the top of the table - you can simply directly edit the property using the table.

Interface Blocks

The editor for an interface block affords you a lot of additional functionality beyond editing hierarchically stacked keywords.

A direct driver example

Now let’s look at a more complex example:

A fork driver example

Response Blocks

The responses block
  • Responses ID This field controls the ID of your responses block.

  • Response Type Choose the type of response for this responses block.

  • Gradient Choose the type of gradient for this responses block.

  • Hessians Choose the type of hessian for this responses block.

  • Table Button Bar There’s a horizontal row across the top of the response table that allows you to manipulate table data.

    • Add New Response Adds a new response to this responses block.

    • Edit Response Edits the properties of the currently selected response.

    • Remove Response Removes the currently selected response from the block.

    • Response Ordering within Category Dakota responses are ordered first by response category (either “scalar” or “field” within the specified type of response), and then by user-customized ordering within that category. This button allows you to configure the latter.

    • Response Metadata Refer to the metadata keyword page for more information on responses metadata.

Within the table, the columns are as follows (from left to right):

  • # The Dakota spec order for this response. Dakota variables are ordered first by response category and then by user-customized ordering within that category.

  • Response Name The name (or “descriptor”) of the response.

  • Category The category that this response belongs to. Changing the category will automatically cause a reordering of Dakota responses based on the new category position of this response.

Response Properties Dialog

Some (but not all) responses have properties, similar to variables. Whether a response has properties is indicated by the enablement of the “Edit Response” button after clicking on a response. To access a response’s properties, click on the response in the table, then click on the Edit Response button (the second button from the left).

Response property editor dialog

A new dialog will pop up that allows you to edit each possible property for that response category. Help buttons are provided for each property so that you can read up on what each one does.

View Response Table by Category

Along the top action bar of the Dakota Visual Editor, you may also notice a “View category” dropdown. This allows you to dive into viewing the properties of a single response category:

Editing a specific response category

Note that we are still in the same response block, but the view has changed. In this screenshot, we’re only viewing field responses. The other scalar responses in this example have been hidden from view. In addition, the properties of those field responses have been exposed as table columns. From this view, if you want to edit the properties of an individual response, you no longer have to push the “Edit” button along the top of the table - you can simply directly edit the property using the table.

Using Pre-processor Markup

To replace a value in a Dakota study with pre-processing markup (i.e. curly brace syntax), use the hotkey combination Ctrl+Shift+P (P for “parameterize”). You can also right-click the field and choose “Create a parameter”.

The value’s text will turn orange and bold, and curly braces will automatically be added around the existing text for you. You can now put whatever you like between the curly braces to indicate the name of your pre-processing variable:

Pre-processing example

To return the field to its normal text entry mode, simply use Ctrl+Shift+P again to deactivate the pre-processor syntax.

The Dakota Visual Editor supports pre-processing markup in a few select areas:

  • Single-line text entry fields

  • Property editor dialogs

  • Table cells for method, variables, and responses blocks

Finally, be aware that a Dakota study marked up with pre-processor syntax will not run by itself in the absence of more information. You must call Dakota with information about how to pre-process the file (for example, Dakota’s command-line -preproc flag).

Learn more about Dakota’s pre-processing tools here.